// Define the pin numbers for Vibration Sensor
const int sensorPin = 7;

void setup() {
  Serial.begin(9600);         // Start serial communication at 9600 baud rate
  pinMode(sensorPin, INPUT);  // Set the sensorPin as an input pin
}

void loop() {
  if (digitalRead(sensorPin)) {               // Check if there is any vibration detected by the sensor
    Serial.println("Detected vibration...");  // Print "Detected vibration..." if vibration detected
  } 
  else {
    Serial.println("...");  // Print "..." other wise
  }

  // Add a delay to avoid flooding the serial monitor
  delay(100);
}